9:00AM to 7:00PM

A-286 Coils

A-286 Coils Manufacturers, A-286 Coils Exporters, A-286 Coils Suppliers, A-286 Coils Importers, A-286 Coils Stockists

A-286 Coils Manufacturers in Mumbai, A-286 Coils Exporters in Mumbai, A-286 Coils Suppliers in Mumbai, A-286 Coils Importers in Mumbai, A-286 Coils Stockists in Mumbai

A-286 Coils Manufacturers in India, A-286 Coils Exporters in India, A-286 Coils Suppliers in India, A-286 Coils Importers in India, A-286 Coils Stockists in India

DIN 1.4980 Coils,UNS S66286 Coils, Werkstoff Nr. 1.4980 Coils, A286 Coils - SAE AMS 5525, SAE AMS 5858, AECMA PrEN2175, AECMA PrEN2417, ASTM A286 Coils,Specialist of Alloy A286 Slatting Coils

A-286 is a nickel and iron-based, austenitic superalloy that is critical for applications requiring high bore and crumbling opposition up to 1300˚F (704˚C), and for lower weight applications at higher temperatures. The mechanical properties of this amalgam are made by reasonable strategy treating and precipitation setting remedies.

The upsides of disease working A286 can streamline absolute use of the material while broadening quality. Hot working and encompassing of A286 is on occasion utilized for more prominent partition transversely over snares where it stays more impervious to twisting than 3xx evaluations of steel. It is truly more hard to machine than these evaluations, yet less mind boggling than other nickel based precipitation-setting blends like 718, and is routinely machined in full or not totally created condition.

Welding A-286 is commonly done in slender walled regions, as heavier segments are helpless to hot part. AMS 5858 is sorted out and obliged welding.

A-286 is in addition by and large utilized in gas turbines for low weight bowls and first and second stage turbine wheels, as it holds quality and usage obstruction at high temperatures. This additionally makes it perfect for max engine drive progression and vapor spouts. A-286 material is comparatively utilized by methods for vehicle creators in fumes valves and complex catch for its rigidity, creep quality and breaking down snag.

A-286 Coils Specifications

Dimensions : EN, DIN, JIS, ASTM, BS, ASME, Alloy
: 5 mm To 500 mm
Diameter : 0.1 mm to 100 mm
Length : 100 mm To 3000 mm Long & Above
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

A-286 Coil Chemical Composition

Element Percent By Weight
C Carbon 0.08 maximum
Mn Manganese 2.00 maximum
P Phosphorus 0.025 maximum
S Sulfur 0.025 maximum
Si Silicon 1.00 maximum
Cr Chromium 13.50 - 16.00
Ni Nickel 24.00 - 27.00
Mo Molybdenum 1.00 - 1.50
Ti Titanium 1.90 - 2.35
V Vanadium 0.10 - 0.50
Al Aluminum 0.35 maximum
B Boron 0.003 - 0.010
Fe Iron Balance

A-286 PPhysical Properties

Density 0.286 lb./in3 (7.92 g/cm3) 0.287 lb./in3 (7.94 g/cm3)
Specific Gravity 7.92 7.94
Melting Range 2500 - 2600 °F 1370 - 1430 °C
Magnetic Permeability 1.010 1.007

A-286 Coils Applications

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Domestic Area

Our Export